|
Wood is a great material for producing strong and beautiful chairs at an excellent value. Also, wood chairs are easy to repair and maintain with easily rusty products. Also, wood is a historically preferred material for chair seating and, it can give a more high-end touch and feel than a plastic or a metal chair.
Lastly, wood chair joints that are glued under high pressure are preferable to any joint using screws only. Screw joint becomes loose easily over time and requires more attention. Good quality wood joints is more durable. And, they can be repaired easily.
RESIN CHIAVARI CHAIR VS. WOOD CHIAVARI CHAIR
1) Resin Chiavari Chairs are produced using a plastic / resin component.(They are easily to get softening under high temperature and crack under low temperature.)
2) Resin Chiavari Chairs need to be reinforced with metal rods, because the resin material is not strong enough for its own structure.
3) Resin Chiavari Chairs are usually heavier and more expensive than wood chairs
4) Sometimes the Resin outside is weaker than the metal rods ,so the rod will be exposed after the resin cracks.
5) Resin attracts dirt and dust because it can conduct static electricity. Dirt usually accumulated in the scratches in the Resin and is hard to clean. It is a fallacy that Resin Chairs require little maintenance.
6) Wood chairs have a more beautiful finish than Resin Chairs because the wood chair uses furniture grade lacquers for a finish. The Resin Chair typically has a colored Resin that is built into the Resin Compound.
7) Lastly,wood chairs are easier to maintain and refinish. And, they can be put with other rusty goods together.
METAL CHIAVARI CHAIR VS. WOOD CHIAVARI CHAIR
2) Metal Chiavari chairs are typically not as beautiful as wood Chiavari Chairs because the bamboo joints are not as pronounced and defined.
3) Also, the back of the wood chair is steam bent to provide a gently curving back,so they are with a very nice back. These elements may not exist on current models of metal chairs which are usually have rougher design elements.
4)In high temperature areas, surface temperature of metal chairs is very high; while in low temperature areas, surface temperature is much low. Therefore, it's not comfortable to sit on.
5)Metal chairs are not easy to store, as they can easily get rusted in the humid environment. It's even more difficult to repair them.
6)There is less flexibility in metal chairs than wood ones, so if the pressure is too big, metal chairs are easier to be bent and broken. |
.gif){kind=small}
